Exhibition

  • Servicing the Water Pump
    Post time: 12-07-2018

    Of all washing machine parts, the water pump probably takes the most punishment because it’s constantly in use. When the pump fails, you can hear or see the trouble: a loud rumbling inside the machine, or a failure of the water to drain out of the tub. Here’s what you can do to fix th...Read more »

  • The cooling capacity of the compressor solutions
    Post time: 06-21-2016

    Compressor because of the long time operation of cold storage, cylinder liner and piston ring parts because of wear, clearance increased sealing performance will be degraded, the volumetric efficiency of the compressor has reduced and cooling capacity will be reduced. When the quantity of refrige...Read more »

  • Ultrasonic cleaning of parts temperature depends on the
    Post time: 06-21-2016

    1 cleaning the dirt 2 ultrasonic suitable working temperature 3 cleaning the optimal cleaning temperature. Together these three conditions, to determine the ultrasonic working temperature. Cleaning parts in general working temperature 50-60 degrees can, high temperature is increased energy consum...Read more »

  • And carbon adsorption drying process
    Post time: 06-21-2016

    Drying time according to the different systems of drying methods will be different: because the hot air circulation drying systems and vacuum drying system is inherently different. In fact, solvent recovery and residual solvent on the parts inside the system recovery and the entire drying process...Read more »

  • Mechanical part cleaning process
    Post time: 06-21-2016

    Solvent systems complete the cleaning process in a closed cabin cleaning, cleaning described above one or more washing basket for processing. Cleaning process starts, cleaning the door lock will be closed, first the cleaning spray will last for 1 minute, after a heated solvent (according to the d...Read more »

  • Washing machine washing technology of mechanical parts
    Post time: 06-21-2016

    Fully closed industrial solvent washing process represents the ideal technique, the aim is to achieve economy of an industrial cleaning uses and consistent cleaning quality. You can use chlorinated solvents, aliphatic hydrocarbon solvent (Class III a) carbon hydrogen chlorine fluorine compounds, ...Read more »

  • Clean, dry, filtered three machines in one
    Post time: 06-21-2016

    High pressure spray cleaning, heating and solvent at room temperature and ultrasonic wave vibration-assisted cleaning method. Spray rinsing, soaking mist and solvent in the process. Optimization of during the process of rinsing fine filter up to 50 micron. Vacuum suction and hot air circulation d...Read more »